SCIGN radome drawings

SCIGN radome drawings: base plate and ring assemblies, domes

reported by
Ken Hudnut
last update: March 4, 1998 [2:00 p.m.]

March 4 (2:00 p.m.) REVISED VERSIONS OF ALL FOUR DRAWINGS AVAILABLE:
HOLD 'SHIFT' THEN CLICK 'RELOAD' BUTTON ON BROWSER

If you want just the latest postscript files, download them
from anonymous ftp at ftp.gps.caltech.edu; /pub/hudnut/dome

Figure 1. Shows the tall dome with the full height cylindrical portion (the 'tall dome' model).

Figure 2. Shows the base plate and ring assembly to be used with the 'tall dome' model.

Figure 3. Shows the short dome with the cut-off cylindrical portion (the 'short dome' model).

Figure 4. Shows the ring-only assembly to be used with the 'short dome' model.

Same drawings, in postscript format
for downloading and printing at higher resolution:

Fig. 1: Postscript file
Fig. 2: Postscript file
Fig. 3: Postscript file
Fig. 4: Postscript file

If for some reason your browser is not allowing you to pick up the latest
versions of these postscript files, try 'shift/reload' - you can get them,
alternatively, from this anonymous ftp site .

These reports are preliminary and have not been reviewed for conformity with U. S. Geological Survey editorial standards. Any use of trade, product, or firm names is for descriptive use only and does not imply endorsement by the U. S. Government.

Return to USGS Pasadena - GPS Index